CG6MMn Stainless Steel Properties, Composition & Equivalent
CF3M ASTM A743 A351 Grade(UNS): J93790 Alloy Family: Austenitic Stainless Steel Equivalent: Nitronic 50 stainless steel
Navigation Table
What is CG6MMn Stainless Steel ?
CG6MMn alloy is a kind of cobalt-based alloy steel with good wear resistance, high-temperature resistance, thermal shock resistance, and scratch resistance.
This alloy steel can work at high temperature above 600 ℃ and certain stress for a long time. It has high temperature strength, good oxidation resistance and corrosion resistance, fracture toughness and other comprehensive properties. The structure of The alloy is single austenite, and CG6MMn has good structure stability and service reliability at different temperatures.
It is also known as a “super alloy”. It is an important material in the fields of aviation, aerospace, petroleum, chemical industry and shipbuilding.

CG6MMn Chemical Composition
C | Mn | Si | P | S | Cr | Ni | Mo | Co | V | N | |
Max | 0.06 | 6.00 | 1.0 | 0.04 | 0.03 | 23.5 | 13.5 | 3.0 | 0.30 | 0.30 | 0.40 |
Min | – | 4.00 | – | – | – | 20.5 | 11.5 | 1.5 | 0.10 | 0.10 | 0.20 |
Heat treatment
Heat to 2050°F [1120°C] minimum, hold for sufficient time to heat casting to temperature, quench in water or rapid
cool by other means
Mechanical Properties
Grade | CG6MMN |
Reduction of Area, min / % | – |
Yield Strength, min | Ksi – 42, MPa – 290 |
Tensile Strength, min | Ksi – 85, MPa – 585 |
Elongation[50mm], min / % | 30 % |
Features
- Good high temperature strength
- Good oxidation resistance
- Good corrosion resistance
- Good fracture toughness
- Not suitable for PWHT
Applications
- Aviation equipment
- Oil development equipment
- chemical industry
- Marine equipment
Attribute
- CG6MMn Stainless steel is a very good corrosion-resistant austenitic steel and strength property even in the worst environment.
- Excellent resistance to high zero and zero temperatures.
- Very low permeability.
- It is magnetic even after cold hardening.
CG6MMn equivalent
Nitronic 50 stainless steel
Nitronic 50 is a kind of high performance austenitic stainless steel. Its yield strength is about twice that of ordinary stainless steel, and its corrosion resistance is improved. It is widely used in various marine and industrial applications.
Compared with 316L alloy, it contains more chromium and molybdenum, which improves the corrosion resistance. The PREN of 316L alloy is 25, while that of nitronic 50 is 34.