CN3MN ASTM A743 A744 Grade(UNS): N08367 Alloy Family: Austenitic Stainless Steel Equivalent: AL6XN alloy
CN3MN is a martensitic stainless steel produced according to ASTM standard, the term is low alloy high strength structural steel, standard number: ASTM A743 A744. This kind of stainless steel belongs to low carbon austenitic stainless steel and has excellent resistance to corrosion (chloride and crevice) in acid, alkali, and salt solutions. In addition, it has pitting corrosion resistance and good corrosion resistance.
The alloy has excellent mechanical properties and overcomes the defects of high carbon steel. It can be used in centrifugal casting under fatigue and low-temperature environment.
At the same time, It is also a super austenitic stainless steel with good corrosion resistance, especially in seawater.
C | Mn | Si | P | S | Cr | Ni | Mo | Copper | Nitrogen | |
Max | 0.03 | 2.0 | 1.00 | 0.04 | 0.01 | 22.0 | 25.5 | 7.0 | 0.75 | 0.26 |
Min | – | – | – | – | – | 20.0 | 23.5 | 6.0 | – | 0.18 |
Grade | CN3MN |
Reduction of Area, min / % | – |
Yield Strength, min | Ksi – 38, MPa – 260 |
Tensile Strength, min | Ksi – 80, MPa – 550 |
Elongation[50mm], min / % | 35% |
AL6XN super austenitic stainless steel
AL6XN is a typical super austenitic stainless steel. It has strong resistance to pitting corrosion, crevice corrosion, and stress corrosion, and its cost is lower than that of corrosion-resistant nickel base alloy.
AL6XN alloy exhibits good corrosion resistance in various severe corrosion environments and is suitable for high chloride aqueous solution and chloride corrosion environment. Used in a variety of high chloride environments: bleaching agents, halogens, and salts or chemicals with high seawater content.